On Semi Q32M210 32位MCU血糖仪应用方案

On Semi公司的Q32M210是精密的混合信号32位MCU, 集成了2个16位模数转换器、高精度电压参考、3个10位数模转换器和基于ARM® Cortex-M3 32位内核以及高度可配置的模拟前端及可编程的32位内核和256kB闪存.芯片还集成所有关键功能，包括实时时钟、电源管理、112段液晶显示屏(LCD)接口、片上低阻抗开关、非限定(uncommitted)运算放大器、精密电压参考(< 50 PPM/℃)及电阻电容(RC)振荡器。器件具有高精度感测,可预测工作以及低功耗等特性,主要用于便携感测应用如病人监测器、无线心电图机(ECG)和血糖仪等便携医疗设备.本文介绍了Q32M210主要特性,方框图, 正常工作条件配置图以及典型和扩展电源配置图, 血糖仪应用电路图和相应的材料清单.

Q32M210 is a precision, mixed−signal 32−bit microcontroller. Themicrocontroller is built on the high performance ARMCortex_−M3 processor.

The microcontroller incorporates a highl绕行电感y configurable sensor interface designed to work directly with a wide range of sensors having multiple characteristics, including specialized electrochemical sensors. The sensor interface inc电感器工作原理ludes dual programmable gain amplifiers, dual 16−bit Analog−to−Digital converters, triple 10−bit Digital−to模压电感器−Analog converters (for voltage waveform generation and other applications) and three uncommitted, low−noise opamps with configurable signal multiplexing. Flexible connectivity to external non−volatile memory, personal computers, wireless devices, LCD displays and a wide range of other peripherals is enabled by several digital interfaces including I2C, USB (2.0 full−speed compliant) and a high−speed SPI/SQI interface.

The microcontroller features flexible clocking options as well as intelligent failure monitoring of power and application interruptions required by high 塑封电感performance, portable, battery operated applications.

All necessary clocks including an internal oscillator, real−time clock and a dedicated clock for USB operation are available on−chip (external crystals required for RTC and USB).An embedded power management unit, which incorporates several low power modes, allows application developers to minimize both standby and active power under a wide range of operating conditions.

The ultra−low sleep current makes the microcontroller ideal for applications that remain inactive for long periods of time. A large on−chip non−volatile flash memory (256 kB) combined with on−chip SRAM (48 kB) supports complex applications and simplifies application development. The flash contains built−in hardware error checking and correction (ECC) for application reliability. Additionally, a configurable DMA unit which supports independent peripheral−to−memory, memory−to−memory, and memory−to− peripheral channels provides flexible, low power data transfers without processor intervention.

A suite of industry−standard development tools, hands−on training and full technical support are available to reduce design cycle time and speed time−to−market.

Q32M210 主要特性:

Ultra Low−Power and Smart Power Management

Less than 400 _A / MHz, up to 16 MHz clock speed

Reliable operation down to 1.8 V; 3.3 V nominal supply voltage

Ultra−low−current sleep mode with Real−time Clock active (< 750 nA)

Low−current standby mode with register and SRAM retention (< 26 _A)

Integrated power supplies minimize need for external components. Only a minimum of external passives is required

Efficient, Powerful and Robust Processing Architecture

32−bit ARM Cortex−M3 CPU

256 kB on−chip flash 电感厂家with integrated hardware ECC for program and user data storage

48 kB on−chip SRAM

Flexible DMA, 4 general−purpose timers, CRC calculator

No external voltage required for flash write operation

Low−Noise, Low−Leakage, Low−Temperature Drift, Configurable Sensor Interface

Triple ultra low−noise opamps with low−leakage inputs and configurable outputs

Dual on−chip Programmable Gain Amplifiers (PGA) and ADCs with flexible input multiplexing and wide dynamic range

Reconfigurable voltage detection unit

Optimal dynamic range scaling of sensor signals

Flexible on−chip signal routing for dynamic reconfigurability

Minimal temperature drift of gain and offset errors allows for precise calibration

二极管的识别技巧和检测方法1.1 作用二极管的主要特性是单向导电性，也就是在正向电压的作用下，导通电阻很小;而在反向电压作用下导通电阻极大或无穷大。二极管按用途分为：晶体二极管、双向触发二极管、高频变阻二极管、变容二极管、发二

基于DSP芯片TMS32LF2407的谐波控制器的硬、软件当今电力系统中的电能质量问题越来越突出，一方面，大量敏感性负荷对电能质量的要求越来越高，而另一方面，越来越多的非线性负荷不断接入电网，使电力系统总体的电能质量状况不断恶化。谐波是电能质量中很重要的一个

ARM/DSP多机I2C通信方案引言在很多嵌入式控制系统中，系统既要完成大量的信息采集和复杂的算法，又要实现精确的控制功能。采用运行有嵌入式Linux操作系统的ARM9微控制器完成信号采集及实现上层控制算法，并向DSP芯片发送上层算

 1/2    1 2 下一页 尾页