Supertex MD1715 和 TC8020 高清医疗超声图像解决方案

Supertex公司的 MD1715和TC8020是高清医疗超声图像应用芯片组。MD1715是两路五级高压高速脉冲发送芯片，采用先进的CMOS技术，±4.5 到12.5V工作电压，输出电流2A，1nF负载的上升和下降时间6.5ns，传输时延10ns，1.8V-3.3V CMOS逻辑电平，而TC8020由六对高压低阈值N沟和P沟MOSFET组成，集成了栅极-源极电阻和齐纳二极管，50V时的峰值电流+/-3.5A。 本文介绍了MD1715和TC8020主要特性。MD1715和TC8020典型应用电路，以及详细电路图。 The Supertex MD1715, paired with the Supertex TC8020, forms a two channel, five level, high voltage, high spee卧式电感d transmit pulser c绕行电感hip set. The chip set is designed for medical ultrasound imaging applications, but can also be used for电感厂家 metal flaw detection, nondestructive evaluation, and piezoelectric transducer drivers. The MD1715 is a two channel logic controller circuit with 12 low impedance MOSFET gate drivers. There are two sets of control logic inputs, one each for channels A and B. Each channel consists of three pairs of MOSFET gate drivers. These drivers are designed to match the drive requirements of the Supertex TC8020. The TC8020 is the output stage of the pulser, with six pairs of MOSFETs. Each pair consists of a P-channel and an N-channel MOSFET. They are designed to have the same impedance and can provide typical peak currents of ±3.5 amps at 200V. MD1715主要特性： Advanced CMOS technology ±4.5 to 12.5V power supply voltage 2A output source and sink current 6.5ns rise and fall time with 1nF load 10ns propagation delay ±2ns matched delay times 12 matched channels 1.8V to 3.3V CMOS logic interface Smart logic threshold Low inductance package MD1715应用： Medical ultrasound imaging Piezoelectric transducer drivers Metal flaw detection Nondestructive evaluation The Supertex TC8020 consists of six pairs of high voltage, low threshold N- and P-channel MOSFETs in a 56-lead QFN package. All MOSFETs have integrated gate-to-source resistors and gateto-source Zener diode clamps which are desired for high voltage pulser applications. The complimentary, high-speed, high voltage, gate-clamped N- and P-channel MOSFET pairs utilize an advanced vertical DMOS structure and Supertex’s well-proven silicon-gate manufacturing process. This combination produces a device with the power一体成型电感 handling capabilities of bipolar transistors and with the high input impedance and positive temperature coefficient inherent in MOS devices. Characteristic of all MOS structures, this device is free from thermal runaway and thermally-induced secondary breakdown. Supertex’s vertical DMOS FETs are ideally suited to a wide range of switching and amplifying applications where very low threshold voltage, high breakdown voltage, high input impedance, low input and output capacitance, and fast switching speeds are desired. TC8020主要特性： High voltage, vertical DMOS technology Integrated gate-to-source resistor Integrated gate-to-source Zener diode Typical peak output +/-3.5A at 50V Low threshold, low on-resistance Low input & output capacitance Fast switching speeds Electrically isolated N- and P-MOSFET pairs TC8020应用： High voltage pulsers Amplifiers Buffers Piezoelectric transducer drivers General purpose line drivers Logic level interfaces 图1。MD1715和TC8020典型应用电路 图2。MD1715和TC8020引脚布局图 图3。MD1715和TC8020详细电路图

瞬态电压抑制器(TVS)相关参数定义与解释在设计汽车的过程中，一个主要的难题是例如控制单元、传感器、信息娱乐系统等保护电子设备，免遭出现在电源线上的有害浪涌、电压瞬态、ESD和噪声的损害。瞬态电压抑制器（TVS）是用于保护汽车电子产品的理想方

电力工业中的新型红外温度传感器在电力生产过程中，温度测量与控制十分重要，温度参数的准确测量对电能的输出品质、生产效率和安全可靠的运行至关重要。目前，在电力生产和检修过程中已逐渐开始采用先进的红外温度计等非传统测温传感器，来代替传统

基于DSP的无刷直流电机控制系统的研究与设计 引言近几年来，随着电力电子器件和现代控制理论的迅速发展，无刷直流电动机由于没有接触式换向装置，不存在换向引起的火花，其具有效率高，转速不受机械换向所限制，可维护性强，安全性高等诸多优点，而被人们广泛